Tel
Add
A waterproof testing chamber is a testing device used to detect and evaluate the waterproof performance of electronic products, lighting fixtures, electrical components, and other equipment. It can simulate various environmental conditions, such as water spray, water spray, and water immersion, to detect waterproof issues that products may encounter during transportation and use.
| Specification | KTM-WT1000 | KTM-WT1300 | KTM-WT1700 |
Internal box volume (L) | 1000 | 2808 | 4284 |
| Internal box dimensions W*D*H (mm) | 1000*1000*1000 | 1300*1200*1800 | 1700*1400*1800 |
| External box dimensions W*D*H (mm) | 1500*1270*1940(Non-unique size) | 2000*1520*2230(Non-unique size) | 2900*1700*2600(Non-unique size) |
| Waterproof rating | IPX1 to IPX6, IPX4K, IPX6K, IPX9K (R.S/SAE testing available upon request) | ||
| Swing arm dimensions (mm) | R200 | R200、R400 | R200、R400、R600 |
| Turntable dimensions (mm) | φ 350 20 (special load capacity can be customized) | ||
| Turntable load capacity (kg) | The internal and external casings are made of SUS304 stainless steel, with a reinforced overall structure. The external casing is coated with a light sand-colored powder paint. | ||
| Internal and external box materials | The water is filtered through multiple water filter cartridges to remove impurities. Two modes are available: automatic drainage and internal circulation. | ||
| Water filtration system | The unit can be moved and adjusted using casters and secured in place with strong bolts (200 kg/caster). | ||
| Total weight (kg) | 1000 | 1500 | 1900 |
| Voltage (V) | AC 380V three-phase five-wire system | ||
| Control system | TEMAK自研控制器（型号：KTM-WATER） | ||
| Communication function | RS232&485 LAN | ||
| Sequencing terminal | Anti-twist design (4th) | ||
| Water inlet | Automatic water intake (water temperature can be customized) | ||
| Water outlet | 1-inch manual drainag | ||
| Air source requirements | Air pressure (5~7) kg/cm2; connection pipe diameter 8mm | ||
