Tel
Add
A cyclic corrosion test chamber is an environmental simulation device used to simulate marine climates and other complex environmental conditions (such as humid heat, dryness, low temperatures, etc.). It features multiple test modes, including neutral salt spray tests, alternating salt spray tests, and copper-accelerated acetic acid salt spray tests. It is widely used in various industries, including materials science, electronics, automotive, aerospace, and metallurgy, to evaluate the corrosion resistance of materials and coatings.
| Specification | KTM-CCT1200F/T | KTM-CCT1600F/T | KTM-CCT2000F/T | KTM-CCT3000F/T |
Series/Material | F/T | F/T | F/T | F/T |
| Internal box volume (L) | 507 | 1040 | 1300 | 9900 |
| Intenal box dimensions W*D*H (mm) | 1200*650*650 | 1600*1000*650 | 2000*1000*650 | 3000*2000*1650 |
| External box dimensions W*D*H (mm) | 2550*1500*1350 | 3000*2350*1500 | 3470*1950*1438 | 3900*3650*3300 |
| Regulatory basis | CNS, ISO, ASTM, GB/T2423.18 , IEC-60068-2-52 | |||
| Test conditions | 0~999H, M, S; (adjustable) | |||
| Test duration | 1.5 ± 0.5 ml/80 cm²/1 hr (average value over 16 hrs) | |||
| Fog difference | Test chamber: 35°C ± 1°C | |||
| Salt spray (NSS/ASS) | Saturated air tank: 47°C ± 1°C | |||
Copper Accelerated Aging Simulation (CASS) | Test chamber: 50°C ± 1°C; saturated air tank: 63°C ± 1°C | |||
| Sealed top cover | Angle of 110 degrees, ensuring no water droplets fall from the top, using a water seal method, no salt spray leakage | |||
| Saturated air tank | Made of SUS#316 material, cylindrical design for stable airflow, copper spiral air tube, ensuring air is fully saturated | |||
| Salt water storage tank (L) | 200 | |||
| Noise (dB) | ≤65 (noise will be affected by surrounding echoes, causing noise values to increase; pay attention to the environment in which the equipment is placed) | |||
| Total weight (kg) | 780 | 880 | 1000 | 2000 |
| Voltage (V) | AC 220V single-phase three-wire system | AC 380V three-phase five-wire system | ||
| Sample rack | 1 set (customizable) | |||
| Spray method | Utilizes the Bernoulli principle to draw in saltwater and then atomize it, ensuring uniform atomization | |||
| Spray mode | Continuous or intermittent misting, with adjustable cycle intervals | |||
Nozzle | Constructed using special glass nozzles, allowing adjustment of mist volume and spray angle | |||
| Air supply system | Air pressure: 1 kg/cm², with two-stage adjustment—the first stage for coarse adjustment and the second for precise adjustment, and equipped with an air filtration system | |||
| Air inlet | Air source requirement: 5 kg/cm², connection pipe diameter: 8 mm | |||
| Exhaust outlet | Exhaust pipe diameter: 2 inches | |||
| Water inlet | Deionized water source (pure water), interface pipe diameter: 1/4 inch | |||
| Drain outlet | Drain pipe diameter: 1/2 inch | |||
