Tel
Add
Vacuum test chamber is under vacuum conditions through heat conduction, heat radiation and other heat transfer methods, to provide the material in the moisture enough heat to accelerate the speed of vaporization, and at the same time in the vacuum pump under the transfer of the vaporization of the vapor, in order to achieve the purpose of rapid drying.
| Specification | KTM-TVA | KTM-TVB | KTM-TVC |
| Inner box volume (L) | 27 | 216 | 1000 |
| Inner box size (mm) W*D*H | 300*300*300 | 600*600*600 | 1000*1000*1000 |
| Outer box size (mm) W*D*H | 720*1250*550 | 920*1700*870 | 1320*1600*1790 |
| Temperature range (℃) | 15～200 (commonly used below 150℃) | ||
| Rising temperature capacity (no load) | RT～+100℃ ≤60min | ||
| Temperature deviation (℃) | Approx. ±3 | ||
| Temperature fluctuation (℃) | ≤±1 | ||
| Heating method | Built-in Ni-Cr alloy heater, heater not exposed | ||
| Vacuum (kpa) | 0.1 | ||
| Noise (dB) | ≤65 (noise will be affected by the surrounding echoes, the noise value will become larger, need to pay attention to the environment where the equipment is placed) | ||
| Overall weight(kg) | 360 | 380 | 400 |
| Voltage (V) | 220±10％ | 380±10％ | |
| Test Hole Size (mm) | No test holes, nitrogen ports are available upon request | ||
| Windows (mm) | 250×250 (Note: no window above 200℃) | ||
| Control System | TEMAK self-developed controller (Model: TMKTHS01) (dedicated controller optional) | ||
| Communication Functions | RS232 & 485 CAN LAN | ||
| Timing Sockets | Optional (GB / AFSL) | ||
| Standard Power Cord | Standard 5M bare wire | ||
| Ventilation Holes and Pipes | Negative pressure hole, positive pressure hole, nitrogen hole | ||
| Unit Case Color | RAL 1053 | ||
