Tel
Add
Walk-in high and low temperature chamber is a large-scale environmental simulation test equipment, mainly used to simulate the extreme temperature conditions (such as high temperature, low temperature and temperature change cycle), in order to detect the product performance, reliability and material adaptability in different temperature environments.
| Specification | KTM-WT(H)A | KTM-WT(H)B | KTM-WT(H)C | KTM-WT(H)D | KTM-WT(H)G | ||||||||||
| Seires | 212 | 412 | 612 | 212 | 412 | 612 | 212 | 412 | 612 | 212 | 412 | 612 | 212 | 412 | 612 |
Inner box | 3375 | 5670 | 8400 | 12600 | 18750 | ||||||||||
Inner Box | 1500*1500*1500 | 1800*1500*2100 | 2000*2000*2100 | 2000*3000*2100 | 2500*2500*3000 | ||||||||||
Outer box | 1705*3200*1930 | 2150*3200*2500 | 2350*3600*2500 | 3500*3350*2500 | 2700*4950*3300 | ||||||||||
Temperature | -20 | -40 | -60 | -20 ~ +120 | -40 ~ +120 | -60 ~ +120 | -20 ~ +120 | -40 ~ +120 | -60 ~ +120 | -20 ~ +120 | -40 ~ +120 | -60 ~ +120 | -20 ~ +120 | -40 ~ +120 | -60 ~ +120 |
Humidity | 20~98 | ||||||||||||||
Warming | -40°C~+150°℃≥3°C/min | ||||||||||||||
Cooling | +150℃~-40℃ ≥1°C/min | ||||||||||||||
Temperature | ≤±2.0 | ||||||||||||||
Temperature | ≤2.0 | ||||||||||||||
Temperature | ≤土0.5 | ||||||||||||||
Humidity | ≤±3.0 | ||||||||||||||
Humidity | ≤±3.0 | ||||||||||||||
| Noise(dB) | ≤75 (noise will be affected by surrounding echoes, and noise levels will increase; pay attention to the environment in which the equipment is placed) | ||||||||||||||
| Voltage(V) | AC 380V three-phase five-wire | ||||||||||||||
Window | 400*600 | ||||||||||||||
Test hole | φ100 | ||||||||||||||
Test hole | Two on each side of the chamber | ||||||||||||||
Control | TEMAK self-developed controller (Model: TMKTHS01) | ||||||||||||||
| Communication functions | RS232&485 CAN LAN | ||||||||||||||
| Water inlet | φ8 pipe diameter, stainless steel external thread, pre-installed brass Y-type filter at the inlet end | ||||||||||||||
| Drain outlet | 1/2-inch pipe diameter, silicone hose, 304 stainless steel pagoda head | ||||||||||||||
| Unit case color | RAL 1053 | ||||||||||||||
