Tel
Add
The Electric motor test bench is a device used to simulate various environmental conditions for performance testing and reliability evaluation of products or components. Supporting test benches include trolley platforms, single-motor shafts, dual-motor shafts, and triple-motor shafts. These are integrated with automotive powertrain, new energy electric drive, electric axle, and new energy powertrain test benches to conduct comprehensive environmental capability testing. They feature extensive high-power load capabilities, engineering design, and application equipment communication via CAN, LAN, RS232, and other interfaces.
Testing Standards:
GB/T 5170.2-2017, GB/T 5170.5-2016, GB/T 2423.1-2008, GB/T 2423.2-2008, GB/T 2423.3-2016. GB/T 10592-2023. GB/T 10586-2006
| Specifications | KTM-TH06A515 | KTM-THO6B515 | KTM-TH06C515 | KTM-THO6D515 |
Series | Driven-End Environmental Chamber (Passive-End Environmental Chamber) | High/Low Temperature Lubrication Bench Environmental Chamber | Electric motor test bench | Electric motor test bench |
| Internal box Volume (L) | 512 | 1000 | 1300 | 1600 |
| Internal Dimensions W×D×H (mm) | 800*800*800 | 1000*1000*1000 | 1300*1000*1000 | 1600*1000*1000 |
| External Dimensions W×D×H (mm) | 1100*1650*1450 | 1200*1861*1833 | 1500*1200*1350 | 1800*1200*1250 |
Temperature Range (°C) | -50~+150 | |||
| Humidity Range (%RH) | 10~98 | |||
| Heating Rate | -40℃~+150℃≥6°C/min | |||
| Cooling Rate | 150℃~-40℃ ≥6°C/min | |||
| Temperature Deviation (°C) | ≤±2.0 | |||
| Temperature Uniformity (°C) | ≤2.0 | |||
| Temperature Fluctuation (°C) | ≤±0.5 | |||
| Humidity Deviation (%RH) | ≤±3.0 | |||
| Humidity Uniformity (%RH) | At ≥75%RH, uniformity <±3%RH; at <75%RH, uniformity <±5%R | |||
| Humidity Fluctuation (%RH) | ≤±3.0 | |||
| Pressure Balance | Equipped with automatic pressure balancing system | |||
| Noise Level (dB) | <70 (Note: Noise levels may increase due to surrounding echoes; pay attention to the equipment placement environment) | |||
| Unit Weight (kg) | 1800 | 2200 | 2800 | 3200 |
| Voltage (V) | AC 380V Three-Phase Five-Wire System | |||
| Test Port | Customizable | |||
| Heating Device | Long-life nickel-chromium alloy heating element | |||
| Heating Method | Contactless equal-cycle pulse width modulation, balanced temperature control P.I.D. + P.W.M. + S.S.R. | |||
| Air Guide Plate Design | Adjustable air guide plate design for enhanced temperature and humidity uniformity | |||
| Circulation System | Take Advantage of Moisture-Proof and Heat-Dissipating Design, Stainless Steel Extended Shaft Circulating Motor | |||
Humidification Method | Steam Humidification, Balanced Humidity Control P.I.D. + P.W.M. + S.S.R. | |||
| Water Supply System | Auto-refill | |||
