Tel
Add
An ice water shock test chamber is a device used to simulate extreme environmental conditions for testing the performance and reliability of products. Based on the concept of temperature shock, the product is first placed in a high-temperature environment, stabilized, and then quickly transferred to a low-temperature ice water mixture environment. The rapid temperature change causes thermal stress on the product, thereby testing parameters such as weather resistance, impact resistance, and material stability.
| Specification | KTM-WTSA | KTM-WTSB | KTM-WTSC |
Internal chamber volume (L) | 320 | 800 | 1200 |
| Basket dimensions W x D x H (mm) | 800*800*500 | 1000*1000*800 | 1500*1000*800 |
| External chamber dimensions W x D x H (mm) | 1800*2100*2300 | 2000*2100*2800 | 3200*2500*3600 |
| High-temperature shock range (°C) | RT+10℃~+180℃ | ||
| Heating rate | RT+20~+180°C >3°C/min Average throughout the entire process | ||
| Temperature deviation (°C) | ≤±2.0 | ||
| Temperature uniformity (°C) | ≤2.0 | ||
Temperature fluctuation (°C | ≤±0.5 | ||
Ice water shock water temperature (°C) | 0~4 | ||
| Ice water immersion water temperature (°C) | 0~4 | ||
| Basket conversion time (s) | ＜15 | ||
| High-temperature dwell time (min) | Adjustable settings: 1–999 | ||
| Ice water shock spray distance (mm) | 325±25 | ||
| Spray flow rate | 3–4 L/3 s (adjustable setting: 1–5 L/3 s) per unit | ||
| Ice water immersion test | Immersion time, test cycle count, and duration can be freely set from 1 to 999 minutes | ||
| Auxiliary water tank | Saltwater/mudwater selection | ||
| Noise (dB) | ≤75 (Noise levels may increase due to surrounding echoes; please note the environmental conditions where the equipment is placed) | ||
| Total weight (kg) | 1200 | 1500 | 3000 |
| Voltage (V) | AC 380V three-phase five-wire system | ||
| Test hole dimensions (mm) | Ф100 | ||
| Number of test holes | 1 piece | ||
| Shelf | 1 piece | ||
| Control system | PLC controller or Mitsubishi controller | ||
| Communication functionality | RS232&485 LAN | ||
| Cooling circulation water (15°C ice water) | DN50 pipe diameter, stainless steel external thread, stainless steel Y-type filter pre-installed at the water inlet en | ||
| Drain outlet | 1.5-inch pipe diameter, silicone hose, 304 stainless steel pagoda head | ||
| Lifting mechanism | Screw rod/chain/cylinder/steel wire rope, etc. | ||
| Maximum load capacity of the basket (kg) | 50 | 100 | 200 |
| Equipment housing color | RAL 1053 | ||
