Tel
Add
The Thermal Shock Test Chamber (Three Zone) is divided into three areas to complete the test, which are high temperature zone, low temperature zone and test zone. It is generally suitable for various materials such as electricians, electronic products, semiconductors, electronic circuit boards, metal materials and so on. Adaptability in rapidly changing environments.
| Specification | KTM-TSA | KTM-TSB | KTM-TSC | KTM-TSD | ||||||||
| Series | 415 | 515 | 615 | 415 | 515 | 615 | 415 | 515 | 615 | 415 | 515 | 615 |
| Inner box volume(L) | 80 | 150 | 252 | 336 | ||||||||
Inner box | 500*400*400 | 600*500*500 | 700*600*600 | 800*700*600 | ||||||||
Outer box | 1450*1500*2120 | 1550*1960*1980 | 1715*1895*2080 | 1900*2070*2080 | ||||||||
1465*1815*2080 | 1550*1960*1980 | 1815*2040*2080 | 1900*2310*2120 | |||||||||
1465*1815*2120 | 1720*2290*2030 | 1815*2050*208 | 1900*2310*2110 | |||||||||
| Temperature range(℃) | -40 ~ +150 | -50 | -60 | -40 ~ +150 | -50 ~ +150 | -60 ~ +150 | -40 ~ +150 | -50 ~ +150 | -60 ~ +150 | -40 ~ +150 | -50 ~ +150 | -60 ~ +150 |
Temperature | ≤±2.0≤±2.0 | |||||||||||
Temperature | ≤2.0 | |||||||||||
Temperature | ≤±0.5 | |||||||||||
| Recovery time (min) | ≤5 | |||||||||||
| Dwell time (min) | 30（optional15min） | |||||||||||
Preheating | RT~+180°℃ ≤50 | |||||||||||
Pre-cooling | RT~-70°C≤70 | |||||||||||
Defrosting | 1000 | 1000 | 500 | 500 | ||||||||
| Noise (dB) | <70 (Noise is affected by surrounding echoes, which can increase noise levels. Please pay attention to the environment in which the test chamber is placed.) | |||||||||||
Nominal aluminum | 5 | 10 | 20 | 25 | ||||||||
| Voltage (V) | AC 380V three-phase five-wire system | |||||||||||
| Test hole size (mm) | Φ50 | Φ50 | Φ100 | Φ100 | ||||||||
Test hole location | One geometric center point on each side of the inner box | |||||||||||
| Grid tray/hook | 2 grating plates/8 hooks | |||||||||||
Control system | TEMAK controller (model: TMK_TSK1) | |||||||||||
Communication | RS232 & 485 CAN LAN | |||||||||||
| Sequential socket | Optional (Chinese standard/US standard) | |||||||||||
Heat dissipation | Water cooling (customer-supplied water tower/chiller) | |||||||||||
| Drain outlet | 1/2-inch diameter, silicone hose, 304 stainless steel tower head | |||||||||||
Air door opening | Pneumatic | |||||||||||
Equipment shell | RAL 1053 | |||||||||||
