Tel
Add
A thermal shock test chamber(two zone) is a testing device that simulates the performance stability of products under extreme temperature changes by rapidly switching between high and low temperature environments.
| Specification | KTM-MTSA | KTM-MTB | KTM-MTSC | KTM-MTSD | KTM-MTSG | ||||||||||
| Series | 415 | 515 | 615 | 415 | 515 | 615 | 415 | 515 | 615 | 415 | 515 | 615 | 415 | 515 | 615 |
| Inner box volume(L) | 48 | 75 | 108 | 256 | 1147.5 | ||||||||||
| Inner box dimensions(W*D*H)mm | 400*400*300 | 500*500*300 | 600*600*300 | 800*800*400 | 900*1500*850 | ||||||||||
| Outer box dimensions(W*D*H)mm | 1400*1820*2210 | 1440*2120*2100 | 1620*2220*2220 | 1930*2580*2200 | 3115*3340*2020 | ||||||||||
| Temperature range(℃) | -40 | -55 | -60 | -40 ~ +150 | -55 ~ +150 | -60 ~ +150 | -40 ~ +150 | -55 ~ +150 | -60 ~ +150 | -40 ~ +150 | -55 ~ +150 | -60 ~ +150 | -40 ~ +150 | -55 ~ +150 | -60 ~ +150 |
| Temperature deviation(℃) | ≤±2.0 | ||||||||||||||
| Temperature unifomirty(℃) | ≤2.0 | ||||||||||||||
| Temperature fluctuation(℃) | ≤±0.5 | ||||||||||||||
| Return time(min) | ≤5 | ||||||||||||||
| Dwell time(min) | 30 (optional 15 min) | 30 | |||||||||||||
| Preheat time(min) | RT~+180℃ ≤50 | ||||||||||||||
| Pre-cooling time(min) | RT~-70℃ ≤70 | ||||||||||||||
| Defrosting frequency（cycles) | 500(optional 1000) | 300(optional 500) | 200(optional 500) | ||||||||||||
| Noise(dB) | <70 (Noise is affected by surrounding echoes, causing noise values to increase. Please pay attention to the environment in which the equipment is placed.) | <72 | |||||||||||||
| Nominal aluminum ingot load (kg) | 5 | 7.5 | 10 | 12.5 | 20 | ||||||||||
| Voltage (V) | AC 380V three-phase five-wire | ||||||||||||||
| Test hole dimensions (mm) | φ50 | φ100 | |||||||||||||
| Test hole location and quantity | On the left side of the chamber, 1 piece | ||||||||||||||
| Storage rack | 2 pieces | ||||||||||||||
| Control system | TEMAK self-developed controller (model: TMK_TC1) | ||||||||||||||
| Communication function | RS232&485 CAN LAN | ||||||||||||||
| Sequential socket | Optional (Chinese standard/US standard) | ||||||||||||||
| Heat dissipation method | Water cooling (customer-provided water tower/chiller) | ||||||||||||||
| Drain outlet | 1/2-inch diameter, silicone hose, 304 stainless steel pagoda head | ||||||||||||||
| Suspended basket lifting mechanism | Screw rod/chain/cylinder/steel wire rope, etc. | ||||||||||||||
| Maximum load capacity of suspended basket | 20 | 30 | 40 | 50 | 200 | ||||||||||
| Equipment housing color | RAL 1053 | ||||||||||||||
